DIY Guides: Mangoose Pro MFC 1:1 clone of the original (Pinout)

Here are some tips and guides Autokent shared to make a very high-quality copy of the original 1:1 Mangoose Pro MFC.

The adapter works with the original drivers from the official website of the manufacturer DrewTech.
It also has the original serial number and is no different from the original except for the price.
The entire board is made exactly with the original on the same processor.

FYI, rework PCB at your own risk

The adapter has already been able to test many diagnosticians from Europe, America, Iran and many other countries – the feedback on the adapter was only positive.

You can also update the software in the engine control units and others through the Techstream program, if there are firmware files.

The adapter can work with any programs that support the work according to the J2534 standard.
For example, Honda, Land Rover, Mercedes – now many automotive diagnostic programs work with this standard and accordingly support this adapter.

Also, with this adapter, flasher programs for flashing car control units can work.

Here are the video tests and comparison of the speed of work with other adapters:

Example of work and the program Techstream V12 on three different adapters. The delay time is compared when the data is displayed in the live data.

Adapters are compared:

1. Mongoose PRO MFC
2. OTC
3. Mongoose PRO MFC2

Fyi, if you are not good at DIY and not equipped with good knowledge and experience, don’t waste time and take a risk to do so. Just spend a few dollars with a decent tool, such as a cheap mini vci cable for customizing, Obdstar F101 for key making, VXDIAG VCX Nano for ecu programming

Original: DIY Guides: Mangoose Pro MFC 1:1 clone of the original (Pinout)

Handy Baby 2 Manual: Download, Install, Activate

JMD handy baby ii user manual for newbies: (3 steps)

Step 1: Handy Baby 2 software download & install

Go to the JMD official website to Download Client

JMD official website: http://www.handy-baby.net/download.html?lang=en_US

Install JMD Client

Open JMD Client

Step 2: Handy Baby 2 account register

Continue to register a JMD account

Fill in the registration information

Step 3: Handy Baby 2 activate

Log in after successful registration

Connect Handy Baby II to the computer

Select Activation

Choose whether to own Handy Baby 1 or not

If you have Handy Baby 1

Connect HB1 to the computer

Connect HB2 after validation, and activate successfully

If you don’t Handy Baby 1

Click Next

HB2 is activated successfully!

Now, you can use Handy Baby 2 for key programming!

Good to know: Handy Baby II vs. Handy-Baby I

Car key programmer	JMC Handy Baby II	JMC Handy Baby
Image
ALL FUNCTIONS that Handy Baby I support (Note 1)	Improved	Support
Simulate customized 246/28/4D chip	Support	NOT Support
Decode 246/28/4D remote	Support	NOT Support
Copy access card	Support most access cards	Support type T5
Unlock a smart key card	Support	NOT Support
Generate a remote	Support	NOT Support
Support a smart voice system	Support	NOT Support
Copy a garage remote	Support	NOT Support
Generate/Copy 8C	Support	NOT Support
Connect to APP via Bluetooth	Support	NOT Support
Safe all-keys-lost mode (with JMD assistant)	Support	NOT Support
MQB + Dashboard odometer correction (with JMD assistant)	Support	Support
Simulate T5/47/AES chips	Support	NOT Support
Generate/Copy 40/42/44	Support	NOT Support

Note 1: Handy Baby I & II Basic Function:

• Transponderscloning : 46/4D/4C/64/13/12/11/33/42
• ID48 cloning:96 bit ID48(changeable uid), dell-phi immo box, part of VW, Fiat, Audi, Volvo, Honda etc. (requires Assistant Adapter for Handy Baby)
• DST80 copy: Toyota 72 “G Chip” (requires G Chip Authorization purchase), Ford 4D83 (online), Hyundai/Kia 4D70
• Chip transfer: 4D60/60 Plus transfer to 4D63/83 cars
• Transponder simulation
• Read/write: 46/48/4D/4D Plus/8A
• Transponders reading: 11/12/13/33/40/41/42/44/46/47/48/60/60 Plus/61/62/63/63 Plus 64/65/66/67/68/69/6A/6B/70/71/72G/73/8A/49 and smart keys etc.
• Chip generation: 60/61/62/63/64/65/67/68/6A/6B/71/60 Plus/63 Plus/72G etc.
• Chip generation: different format data of ID46
• Frequency and modulationremote tester
• ECU signal/data stream of ID46/key type (all lost) detect
• Free online updates

original:Handy Baby 2 Manual: Download, Install, Activate

Kess V2 Firmware 6.008 vs Firmware 5.028 vs Firmware 5.017

Look here: Kess V2 frmware 6.008 vs Kess frmware 5.028 vs Kess frmware 5.017
Kess v2 5.017 has 594 protocols in SD-Card (594 in format .prt)
Kess v2 5.028 has 637 protocols in SD-Card (637 in format .prt)
Kess v2 6.008 has 709 protocols in SD-Card (515 in format .prt and 194 in new format .kprt) :
Here’s some info about Kess v2 firmware 6.008.

Works only without Internet Connection

With internet connection

All bootloader st10fxxx are ok and all bootloader tricore are Grey.

The half of obd protocols are Grey

Kess 6.008 on gearbox

This is for your information.
Kess 6.008 is the latest though. It has not been tested by real professionals.
And a lot of protocols cannot work at all.
To use with security and relief, Kess v2 5.017 is your way to go.

Source:  http://www.chinacardiags.com/wholesale/kess-v2-v5017-red-pcb-firmware-supports-online-added-140-protocol-no-token-limited-50093.html

Original:Kess V2 Firmware 6.008 vs Firmware 5.028 vs Firmware 5.017

Skoda Octavia 2015 MQB mileage correction: VVDI2 done!

Tested successfully! VVDI2 Xhorse is able to do odometer correction for Skoda Octavia 2015.
Vvdi2 sw version: VVDI2 VAG 5.5.0

The old mileage read from the dashboard: 66612km

Gonna read km with VVDI2


The mileage is the same as what is displayed in the dashboard


Change km: 66000km


Km recalibration is only used for repair and maintenance!
The user should take all risks if you use for the illegal purpose

Confirmed to save eepriom data before km write

Switch on with the working key before press OK
If the car has keyless go, put the working key nearby the car coil and switch on

choose login method. Here login method 2

Writing data success
Pls use “Reset instrument” to activate the instrument after all the operation is done

Reset success

Go to Special function: ABS brake
Read and clear data

The current km on the dash: 66000km (same as what is written just now)

Done!
You have to know: optional solutions of MQB mileage change
Xhorse is much more expensive than Obdstar tools but Xhose supports MQB immo and dash while Obdstar supports dash only.
Note that Xhorse VVDI2 is the only key programmer can be used for VAG MQB platform instrument immobiliser. Instrument with NEC35XX (Continental/VDO)
VVDI2 works perfect in BMW and VAG key programming.
Have it if BMW key programming is required.
If not, go for Obdstar tools - cheaper but working good, support more MQB types
If you need a tool for VAG immo and dashboard, go for Obdstar H110;
If you need a universal odometer correction tool, go for Obdstar X300M;
If you works for a workshop, go for Obdstar key master and you’ll never look back.
Ps. Obdstar X300M and H110, at the same price, depends on your need.
Good to know: MQB key programming and odometer correction - tips & guides:
https://goo.gl/Mcvqdc

 Edit by chinacardiags.com:Skoda Octavia 2015 MQB mileage correction: VVDI2 done!