Kess V2 Firmware 6.008 vs Firmware 5.028 vs Firmware 5.017

Look here: Kess V2 frmware 6.008 vs Kess frmware 5.028 vs Kess frmware 5.017
Kess v2 5.017 has 594 protocols in SD-Card (594 in format .prt)
Kess v2 5.028 has 637 protocols in SD-Card (637 in format .prt)
Kess v2 6.008 has 709 protocols in SD-Card (515 in format .prt and 194 in new format .kprt) :
Here’s some info about Kess v2 firmware 6.008.

Works only without Internet Connection

With internet connection

All bootloader st10fxxx are ok and all bootloader tricore are Grey.

The half of obd protocols are Grey

Kess 6.008 on gearbox

This is for your information.
Kess 6.008 is the latest though. It has not been tested by real professionals.
And a lot of protocols cannot work at all.
To use with security and relief, Kess v2 5.017 is your way to go.

Source:  http://www.chinacardiags.com/wholesale/kess-v2-v5017-red-pcb-firmware-supports-online-added-140-protocol-no-token-limited-50093.html

Original:Kess V2 Firmware 6.008 vs Firmware 5.028 vs Firmware 5.017

Ksuite 2.25 download for Kess 5.017 Ktag 7.020

Ksuite 2.25 is confirmed to work with china clone KTAG 7.020 and KESS 5.017
https://mega.nz/#!yMNBCCJZ!PaN8z0L-UPh3FAxegRiCiAwW-320WV-1SCgfDw_o9uA
Password through svvag2000 at https://mhhauto.com/Thread-Ksuite-2-25-for-china-clones-Kess-5-017-KTAG-7-020
Ksuite 2.25 is working with Kess v2 5.017

Ksuite 2.25 is working with Ktag 7.020

Ksuite 2.25 questions and answers:
Q: this is internet safe?
A: yes it's internet safe
Q: I have a Kess 5,017 using 2.47 and Ktag 7.020 using 2.23.
Am I better using 2.25 for both?
A: Kess 5.017 = ksuite 2.47
ktag 7.020 = ksuite 2.23 or 2.25
Ksuite 2.25 reviews:

1. You solved my problem with read Fiat ECU . Great Job .
2. It's fantastic
   I read now EDC17cp57 with separate files. Previously, i could only read it KTM100.
3. I read now EDC17cp57 with separate files.WRITE OK. Yes ok
4. Gooooooood job
   it is working for in my
   KTAG thanks a lot

Ksuite 2.25 warning:
Ksuite v2.25 is not tested by real professionals.
You’ll try it at your own risk!
For sake of security, you’d better have Ksuite 2.47 working with Kess 5.017 or Ksuite 2.23 working with Ktag 7.020 Original:Ksuite 2.25 download for Kess 5.017 Ktag 7.020

This is from chinacardiags.com: Ksuite 2.25 download for Kess 5.017 Ktag 7.020

BMW ME9.2 read/write: Ktag? Kess? MPPS? Xprog? BDM100?

Looking for a good tool to read and write a bosch me9.2 from a 2005 bmw e63.
i am a newbie at this. maybe someone has some advise for me.
Optional solutions:
Ktag bench reads/writes BMW ME9.2:
when you select brand and type you will have HELP button, if not click on OK.... next site the system will show you all types of connect possibility....
not possible by obd, you´ll have to do it by bench and open ecu...

Kess v2 OBD reads/writes BMW ECU ME9.2:
You can do it kess via obd
MPPS cable should work:
The way to wire it, ask in open forum for a picture of MPPS pinout for BMW ME9.2.
Xprog works:
BDM pinout for XPROG

BDM100 works:
i have managed read and write with bdm100. At the firs beginning, when i read from original and trying to write it to other same kind ecu i get erasing block fail error.
Finally, I found point which is connected to pin 53 (WP). I connected voltage to test point and now succeed to write dump from other ecu.







Original:BMW ME9.2 read/write: Ktag? Kess? MPPS? Xprog? BDM100?